I built this cafe racer to have something unique. 2 AR15 uppers mount on the sides of the bike above the mufflers. They can be removed and the bike looks just as good. Under the seat there are two mounts for AR15 lower receivers. (one mount will require drilling a small hole in the seat pan before it can be used)The mounts were made by a local machine shop and welded on before powder coating by Brad Gregory.
I built this with the MOTOGADGET M-Unit and wiring kit.This also has the Motogadget RFID so you turn the bike on by swiping the RFID chip over the back seat. The frame, swing arm and engine guards were professionally powder coated by a local commercial painting/powdercoating shop. The bike has no leaks or issues and starts right up every time.The battery is under the bike in a battery tray made by CafeRacerkits.co as is the rear fender and radiator cover.The upholstery was done by a local motorcycle upholstery shop.The carbs were done by Murrays Carbs who is well respected on the cx500 forums and they perform flawlessly.The radiator fan is an electric fan from a Ducati as per the instructions on the cx500 forums.
*the speedometer/tachometer is the only thing that doesn’t work. If I were keeping the bike I would upgrade to the Motogadget Mini speedometer.
I removed the original so I don’t know the exact mileage, but it is under 15,000.
* there is a small dent in the tank which you can see in the pictures.
SHIPPING is the sole responsibility of the buyer.